.png)
Our Recent Projects
Campbell Barracks, Swanbourne WA – January 2017 to February 2018.
Lightning protection installation:
-
Install and test lightning protection on outdoor building.
6 x 11kV / 420V Substations:
-
Install substation earth grids and test earth stake resistance/earth continuity.
Garden City Shopping Center, Booragoon WA – October 2017 until now.
Perform HV Switchroom maintenance and testing of
6 x 22kV indoor substations:
-
Carry out primary and secondary injection testing of relays.
-
Maintenance and testing of HV and LV air circuit breakers.
Karrinyup Shopping Center, Karrinyup WA – October/December 2017.
Carry out earth testing including Earth Grid Impedance, Step & Touch and Fall of Potential.
Campbell Barracks, Swanbourne WA – May/November 2017.
Testing of 30 x LV Schneider circuit breakers:
-
Perform secondary injection testing of LV circuit breaker protection relays.
Test and commission 6 x 11kV Ring Main Units:
-
Secondary injection testing of protection relays and primary injection of CT’s.
-
Check functionality of switchgear.
Campbell Barracks, Swanbourne WA – April/November 2017.
-
Commission 22kV RMU (Ring Main Unit) and perform relay testing.
-
Carry out earth testing at Main Substation including Step & Touch and Fall of Potential.
Perth Airport, Perth WA – November/December 2016.
LV circuit breaker, Relay and CT (Current Transformer) testing:
-
Carry out primary and secondary injection testing of protection relays and CT’s.
-
Program relay settings.
-
Test and commission LV air circuit breakers.
Upgrade electrical metering, Perth WA – June/July 2016.
Meter calibration, installation and testing:
-
Check accuracy of electrical meters.
-
Move, reinstall and test meters.
Venues West, University Western Australia, Perth WA – October/December 2016.
Commission 22kV RMU (Ring Main Unit):
-
Perform primary and secondary testing of relays.
-
Carry out Step & Touch and Fall of Potential earth testing.
Curtin University, Bentley WA – June/August 2015.
Test and commission 22kV RMU (Ring Main Units):
-
Program relay settings.
-
Carry out primary and secondary injection testing of protection relays and CT’s.
Test and commission 22kV transformers:
-
Winding Resistance and Turns Ratio.
-
IR (Insulation Resistance) and PI (Polarisation Index).